GRAPHITE GASKET GRAPHITE GASKET INDUSTRIAL GASKET Johor Bahru (JB), Malaysia, Desa Jaya Supplier, Suppliers, Supply, Supplies | Deltech Engineering Sdn Bhd

Industrial Graphited Gasket.

The graphite gasket is cut out from a full graphite sheet. it is cut as per according to flanges size.
There are 2 types of cutting- FULL FACE OR RAISED FACE.

FULL FACE- Cut out the gasket as per flange and able to cover whole flange one side surface. The bolts hole is visible.

RAISED FACE - Cut out the gasket to place on flange center. It is a ring and no bolt holes.

Graphite gasket thickness is standard 3mm with wire reinforcement and cut as per flange standard.

E.g. Graphite gasket 3mm, JIS 10k standard and Full Face / Raised Face (See picture)

Our graphite gasket brand is IT1000,
a) Ideal for heavy industrial gas or steam piping 
b) Solid body enable gasket for high temperature and pressure resistance.
c) Used for absorbing friction in between flanges. 
d) Long storage life.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version